Wireless Alarm Panels

LS5000 Panel


The LS5000 is an advanced radio security alarm system which is both easy to install and operate. The alarm control panel can be installed as a wireless unit, a wired or two wired panel or mixed of all three.

The system can control up to 24 detectors, 16 of which can be wireless, 4 traditional detectors (6 wire PIR or door/window contacts) and 4 two wire detectors (2 wire PIR).

Every component contains a tamper detection device. If any attempt is made to interfere with any part of the installation, an alarm will sound immediately even if the system is not armed.

The system incorporates sophisticated anti-jamming protection for added protection.

On board keypad
Wireless key fob
Engineer Programmable Functions
Select walk-through zones
Select entry/exit zones
Full alarm for tamper in standby mode
Remote dis requires entry timer
Enable/disable secondary pin code
Engineer only reset
User Programmable Functions
Wireless detector
Delete a wireless detector
Entry/exit time: 10-60 seconds
Siren duration:1-20 minutes
Siren test
Strobe test
Chime zone
New user pin code
New secondary pin code
Recall alarm events maximum 10 events
Walk Test
Visual on all zones
Panel LED Indicators
Mains, interference, fault, low battery, tamper, intruder
Wired Terminal Connections
4 X 6 wire zones
4 X 2 wire zones
1 x tamper
1 x external strobe/siren
1 x AC in
1 X 50 meters flat twin core wire
1 X External mains adaptor
1 x battery backup
1 x aux
Electrical Specification
Current consumption quiescent: 240mA, In alarm: 420mA
Auxiliary voltage output 12Vdc
Siren/strobe voltage output 12Vdc
Battery charge voltage 13.8Vdc
Fuses strobe, bell, aux, AC
Radio system 433Mhz super heterodyne type narrow band receiver
Power Supply Adaptor Specification
Primary mains supply 230Vac, 50Hz
Secondary 16Vac
Mains Fuse 3 amp 250V
Battery back up 1.3 - 2.2Ah 12vdc sealed lead acid battery
Environmental Specification
Operating Temperature -0ºC - + 40ºC
Storage temperature -20ºC - + 60ºC
Maximum humidity 95% non-condensing
Physical Specification
Dimensions 214mm X 286mm X 50mm
Housing material Polycarbonate
European Standards
Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS