Wireless Alarm Panels

LS5000 Wireless Alarm Kit


LY52-020-41

The LS5000 is an advanced radio security alarm system which is both easy to install and operate. The alarm control panel can be installed as a wireless unit, a wired or two wired panel or mixed of all three. The system gives the installation scope for expansion and flexibility.

Alarm System Kit Contents
1 X LS5000 alarm control panel
1 X Two-wire PIR
1 X Wireless PIR
1 X Wireless magnetic contact
1 X Wireless key fob
1 X LS5000 user & installation manuals
Screws & wall plugs
LS500S Alarm Control Panel Specifications
16 Wireless Sensors
4 Two Wired Sensors
4 Six Wired Sensors
Arming/Disarming
On board keypad
Wireless key fob
Engineer Programmable Functions
Select walk-through zones
Select entry/exit zones
Full alarm for tamper in standby mode
Remote dis requires entry timer
Enable/disable secondary pin code
Engineer only reset
User Programmable Functions
Wireless detector
Delete a wireless detector
Entry/exit time: 10-60 seconds
Siren duration:1-20 minutes
Siren test
Strobe test
Chime zone
New user pin code
New secondary pin code
Recall alarm events maximum 10 events
Walk Test
Visual on all zones
Panel LED Indicators
Mains, interference, fault, low battery, tamper, intruder
Wired Terminal Connections
4 X 6 wire zones
4 X 2 wire zones
1 x Tamper
1 x External strobe/siren
1 x AC in
1 X 50 meters flat twin core wire
1 X External mains adaptor
1 x Battery backup
1 x Aux
Electrical Specification
Current consumption Quiescent: 240mA, In alarm: 420mA
Auxiliary voltage output 12Vdc
Siren/strobe voltage output 12Vdc
Battery charge voltage 13.8Vdc
Fuses Strobe, bell, aux, AC
Radio system 433Mhz super heterodyne type narrow band receiver
Power Supply Adaptor Specification
Primary mains supply 230Vac, 50Hz
Secondary 16Vac
Mains Fuse 3 amp 250V
Battery back up 1.3 - 2.2Ah 12vdc sealed lead acid battery
Environmental Specification
Operating Temperature -0ºC - + 40ºC
Storage temperature -20ºC - + 60ºC
Maximum humidity 95% non-condensing
Physical Specification
Dimensions 214mm X 286mm X 50mm
Housing material Polycarbonate
European Standards
Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS
Two Wire PIR Specification
Sensor Dual element pyro
Digital pulse count 1, 2 & 4 jumper selectable
LED Enabled via jumper
Adjustable lens Either wide angle or long range
Alarm period 2-3 seconds
Mounting height 2m – 2.5m
Operating temperature -0 to + 40ºC
Angle 105º X 110º
Distance 15 meters
Zone Number 64
Plastic housing material ABS
Dimensions 100mm X 65mm X 45mm
Weight 100g
Infrared Key Fob
Wireless transmitter 3 button operation Arm, part arm and off, two button press panic
Maximum number per system 4
Transmission range 110 meters open area
Battery 1 X 12V 27A alkaline battery
Battery life Approximately 3 years
Plastic housing ABS
Wireless PIR Specification
Sensor Dual element pyro
LED Enabled via jumper
Adjustable lens Wide angle
Mounting height 2m – 2.5m
Operating temperature -0 to + 40ºC
Angle 105º X 110º
Distance 12 meters
Transmitting range 110 meters open area
Batteries 2 X1.5V AA alkaline batteries
Battery life Approximately 2 years
Plastic housing material ABS
Dimensions 100mm X 65mm X 45mm
Weight 100g
Wireless Magnetic Door/Window Contact
Maximum gap distance 10mm
Transmission range 110 meters open area
Battery 2 X 1.5V AAA alkaline batteries
Battery life Approximately 3 years
Plastic housing ABS