2 Wire Alarm Panels

LS400 Kit


LY52-000-33

The LS400 is an indoor system based upon patented technology to give good level of protection and reliability. It is a fuse-less system with special electronic circuitry for short circuit protection. It is idea for DIY installations, easy to install and operate, with no special tools or training required.

General Specifications
Control Panel Specifications 4 programmable zones
Arming/Disarming Through on board keypad
Walk Test Visual on all zones
Programmable Functions
Full guard & part guard
4 programmable zones
Timed entry/exit, walk through, instant, chime
Codes: 1 user, 1 silent (duress) if dialler fitted.
Programme Timers
Full guard entry/exit delay 15, 30 or 45 seconds
Part guard exit delay 15, 30 or 45 seconds
Siren duration 1, 3 or 10 minutes
Power Supply Adaptor
Primary mains adaptor voltage rating 230Vac, 50Hz, 10Watt
Secondary 15Vac, 900mA
Battery back up 8 X 1.5V, size AA alkaline batteries.
Alarm System Kit Contents
1 X LS400 two-wire alarm control panel
2 X Two-wire PIR
4 X Two-wire magnetic contacts
1 X Two-wire external bell box
1 X LS400 user & installation manuals
1 X 50 meters flat twin core wire
1 X External mains adaptor
Cable clips, wall plug & screws
European Standards
Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS
Two Wire PIR Specification
Sensor Dual element pyro
Digital pulse count 1, 2 & 4 jumper selectable
LED enabled via jumper
Adjustable lens either wide angle or long range
Alarm period 2-3 seconds
Mounting height 2m
Operating temperature -0 to + 40ºC
Angle 105º X 110º
Distance 15 meters
Zone Number 64
Storage temperature -10 to + 50ºC
Plastic housing material ABS
Dimensions 100mm X 65mm X 45mm
Weight 100g
Two Wire External Bell Box Specification
Sound output 110dB at 1 meter
Housing material ABS
Colour options white body, blue lens
Dimensions 160mm X 114mm X 50mm
SL6600 LCD Remote Keypad
Operating Voltage 12Vdc
LCD light off 16.7mA
Wiring 4 core multi stranded 7 X 0.20m²
Dimensions 135 X 80 X 30mm
Electrical Specifications
Quiescent current 25mA
Alarm Current 150mA
Auxiliary voltage output 13.5Vdc
Switched positive voltage When low: 1.0Vdc, When high 12Vdc
Bell voltage output 12Vdc
Speaker voltage output 12Vdc
Internal sounder 0.25 watts 32 ohms
Positive loop threshold (zones1-7/tamper) Minimum open resistance: 70K, Maximum closed resistance: 10K
Negative loop threshold (system tamper) Minimum open resistance: 110K, Maximum closed resistance: 20K
Two Wire External Bell Box Specification
Sound output 110dB at 1 meter
Housing material ABS
Colour options white body, blue lens
Dimensions 160mm X 114mm X 50mm